Ormco Enlight Orthodontic Adhesive Only

Ormco Enlight Light Cure Adhesive

Enlight Bonding System

Highly filled light-cure adhesive. Bis-GMA resin for superb handling characteristics, easy cleaning.

A highly active initiator system supports reduced cure times.

Tooth preparation

• Place the lip/cheek retractor and saliva ejector in the mouth. prophy the teeth thoroughly with pumice and water. Rinse with water while using a high-speed evacuation system. Dry the teeth with an air syringe.
• Apply the etchant solution to the bonding surfaces with applicator sponges. Gently dab the etching solution: do not rub. A continuous dabbing of fresh solution for 30 seconds is most effective. Rinse thoroughly with a forceful air-water spray and suction using a high-speed evacuator. Maintain a dry field. Do no allow the patient to rinse or permit contact of the etched enamel with saliva or mucosal tissue.
• Dry the etched enamel with clean, dry air, The etched enamel must now have a uniform, dull frosty appearance.

Bonding Procedure

• Dispense a small amount of sealant on the mixing pad. apply ortho solo sealant to teeth using the brushes provided. A thin, uniform coating should extend from the gingival crest and vover all of the etched enamel. Replace the cap immediately after dispensing sealant.
• Extrude a small amount of enlight adhesive paste into the base of the bracket pad. After application, clean the tip and replace cap.
• Place the bracket onto the tooth surface immediately after applying adhesive.
• Adjust the bracket to its final position and press firmly.
• Remove the excess adhesive from the periphery of the base of the bracket.
• With Demetron’s optilux 501,  Expose the adhesive for 10 seconds for metal brackets, and 5 seconds for ceramic brackets. shining the light directly through the bracket bonds ceramic brackets. Divide the curing time and shine the light on the mesial and distal edges of the brackets to bond metal brackets.
• Active archwires may be placed immediately after curring the last bracket.

Shelf life and storage

• Do not expose materials to intense light or elevated temperatures.
• Enlight should be used at ambient temperature.

Caution :

• Etching Solution: Contains 37% phosphoric acid solution. Avoid contact with skin, eyes, and soft tissue. In case of contact with skin or eyes, flush immediately with water, get medical attention for eyes. Do not take it internally.
• Sealant and paste: Avoid prolonged or repeated contact with oral tissues and skin. wash skin with soap and water after contact. uncured materials may cause contact dermatitis. if skin irritation occurs, discontinues use. Use in a well-ventilated area. Keep containers closed when not in use.

More Information

Return Policy Accepted Within 1 Week ( Buyer Pays Return Shipping)
Dental Brand N/A